Expert Plumbing and Heating Services for your Home

---

The existing plumbing system in the residence replaced or repaired to improve reliability, water quality, and code compliance. Work includes:

• Shut-off and safe removal of outdated or failing supply and/or drainage piping throughout the residence.
   
• Installation of new water supply lines using [material type, e.g., PEX, copper, CPVC], sized and routed according to local building codes and fixture demands.
   
• Replacement of drain, waste, and vent (DWV) piping to ensure proper flow and venting, reducing the risk of clogs and sewer gas issues.
   
• Upgrading of fixture shut-off valves, hose bibbs, and angle stops as necessary.
   
• Connection to existing or upgraded fixtures, including sinks, tubs, showers, toilets, and appliances.
   
• System pressure testing and inspection to confirm leak-free operation and proper flow.
   

Work completed in compliance with all applicable plumbing codes and standards, ensuring long-term reliability and performance.
 

Routine plumbing maintenance performed to ensure optimal system performance, prevent unexpected failures, and extend the life of plumbing components. Work includes:

• Inspection of all visible plumbing systems, including supply lines, drain lines, and fixtures for leaks, corrosion, or wear.
   
• Testing of water pressure and flow at various fixtures to identify potential issues with supply lines or regulators.
   
• Inspection and operation check of shut-off valves, hose bibbs, and supply connections for proper function and signs of deterioration.
   
• Drain line evaluation, including snaking or flushing if slow-draining conditions were noted.
   
• Inspection of water heater (tank or tankless), checking for proper temperature, signs of leaks, sediment buildup, or faulty components.
   
• Visual check of sump pump, backflow preventers, or pressure regulators (if present).
   
• Minor adjustments or tightening of fittings and fixtures as needed.
   
• Maintenance report provided outlining current condition, findings, and any recommended repairs or upgrades.
   

All work performed in accordance with industry standards and local code requirements.

Emergency plumbing service is performed in response to an urgent issue to prevent property damage and restore system functionality. Work includes:

• Rapid response to customer location following report of [issue – e.g., burst pipe, water leak, sewer backup, etc.].
   
• Assessment and isolation of the problem area to minimize further water damage and ensure safety.
   
• Temporary and/or permanent repairs made to address the immediate issue, including shut-off valve operation, pipe repair or replacement, clearing blockages, or restoring drainage.
   
• Inspection of surrounding plumbing components to identify any related concerns or risks of recurrence.
   
• System testing and verification to confirm proper operation post-repair.
   
• Customer advised on the cause of the issue, recommended follow-up work (if any), and preventative measures.
   

Service performed in accordance with local plumbing codes and emergency safety practices.

The existing water heater unit removed and replaced with a new, high-efficiency model to restore reliable hot water supply and improve energy performance. Scope of work includes:

• Shut-off and safe disconnection of the existing water heater, including water, gas/electric, and venting systems.
   
• Removal and disposal of the old unit in accordance with local regulations.
   
• Installation of a new [type – e.g., tank/tankless, gas/electric] water heater, properly sized for the building’s hot water demand.
   
• Upgrades to piping, fittings, or venting as needed to meet code compliance and manufacturer requirements.
   
• Installation of new shut-off valves, expansion tank, and/or drain pan (as required).
   
• Gas pressure or electrical connection testing to ensure safe operation.
   
• System start-up and commissioning, including checking thermostat operation and ensuring proper temperature settings.
   
• Customer orientation and instructions provided for the new unit’s operation and maintenance.
   

Work completed in accordance with local plumbing and building codes.

Performed installation and/or replacement of the HVAC system to ensure efficient and reliable heating, ventilation, and cooling throughout the property. Scope of work included:

• Removal and safe disposal of the existing HVAC unit and associated components (if applicable), including duct connections, refrigerant lines, and electrical wiring.
   
• Installation of new [type/model] HVAC system, properly sized and matched to the building's load requirements for optimal performance and energy efficiency.
   
• Fabrication or adjustment of ductwork, plenums, and transitions as necessary to ensure proper airflow and system integration.
   
• Installation of new electrical connections, refrigerant lines, condensate drain, and thermostat wiring, in accordance with code.
   
• Charging the system with refrigerant (as applicable) and verifying pressure levels and temperature split.
   
• Start-up, calibration, and full operational testing to ensure the system is functioning within manufacturer specifications.
   
• Customer orientation provided on system operation, thermostat use, maintenance schedule, and warranty coverage.
   

All work completed in compliance with local mechanical codes, manufacturer standards, and energy efficiency guidelines.

Diagnostic and repair service performed on the HVAC system to restore proper heating and/or cooling operation. Work included:

• Thorough system inspection and diagnostics to identify the root cause of performance issues or failure.
   
• Testing of electrical components, including thermostat, capacitors, contactors, relays, and circuit boards.
   
• Inspection of refrigerant levels and pressures, ensuring no leaks or system imbalances.
   
• Cleaning and adjustment of coils, filters, fans, and drainage lines as needed for optimal performance.
   
• Replacement or repair of faulty components, such as motors, sensors, fuses, or control modules.
   
• System startup and performance testing to verify full operational status, airflow, and temperature control.
   
• Customer advised of work completed, system condition, and any recommended follow-up maintenance or repairs.
   

Work completed in accordance with manufacturer specifications and industry safety standards.

Complete installation of a high-efficiency ductless mini-split system to provide year-round comfort with zoned temperature control and energy savings. Work includes:

• Installation of ductless mini-split heat pump system (indoor and outdoor units) sized according to the property’s heating and cooling load.
   
• Mounting of indoor air handlers in designated zones for optimal airflow and coverage.
   
• Installation of refrigerant lines, drain lines, and electrical wiring routed between indoor and outdoor units.
   
• Vacuum testing and refrigerant charging performed to manufacturer's specifications.
   
• Startup and system testing to ensure proper operation in heating and cooling modes.
   
• User training provided on system controls, maintenance, and zoning options.
   

All work completed in accordance with manufacturer instructions, mechanical/plumbing codes, and energy efficiency standards.

Mini-split repair service performed to restore the system's optimal performance and resolve any operational issues. The scope of work includes:

• Thorough diagnosis of system issues, including a review of system operation, refrigerant levels, airflow, and temperature regulation.
   
• Inspection of electrical components, such as the thermostat, control board, contactors, and sensors, to identify any faults or malfunctioning parts.
   
• Testing of refrigerant levels and pressure to ensure the system is adequately charged and there are no leaks.
   
• Repair or replacement of damaged components, such as compressors, fan motors, capacitors, or defective wiring.
   
• Cleaning of indoor and outdoor units, including air filters, evaporator coils, condenser coils, and condensate drains, to ensure efficient performance and prevent future problems.
   
• Refrigerant recharge (if necessary), following proper recovery and handling protocols to ensure the correct refrigerant levels for optimal operation.
   
• System start-up and testing to confirm the repair has been completed successfully and the system is functioning as designed, both in heating and cooling modes.
   
• Customer advised on the repair performed, any further steps to improve system efficiency, and maintenance tips to prolong the lifespan of the unit.
   

All work performed in accordance with manufacturer specifications, local building codes, and HVAC industry safety standards.

Complete installation of radiant heating systems to provide year-round comfort with zoned temperature control and energy savings. Work includes:

• Installation of radiant floor heating system, including tubing layout and securing within subfloor or concrete slab, per design specifications.
   
• Connection to hydronic heat source (e.g., boiler or water heater), with proper zoning valves, manifolds, and circulation pumps.
   
• Pressure testing of tubing system to ensure leak-free performance prior to final covering (concrete or floor finish).
   
• System balancing and control setup, including thermostats and zone controllers for independent room-by-room heat regulation.
   
• Full operational testing to verify even heat distribution and efficient performance.
   

All work completed in accordance with manufacturer instructions, mechanical/plumbing codes, and energy efficiency standards.

Gas fitting work to install, modify, or replace sections of the gas supply system in accordance with local codes and safety standards. Scope of work included:

• Shut-off and isolation of the gas supply to ensure a safe working environment.
   
• Installation and/or modification of gas piping, using approved materials (e.g., black iron, CSST, copper) sized appropriately for appliance load and distance.
   
• Connection of gas appliances such as [furnace, water heater, range, BBQ, fireplace], ensuring proper fittings, regulators, and shut-off valves are in place.
   
• Pressure testing and leak detection of the entire gas line using manometer or gas sniffer to verify safe operation.
   
• Start-up and commissioning of connected appliances, including pilot light ignition and functionality testing.
   

All work performed in compliance with relevant gas safety codes, regulations, and manufacturer specifications.

Drain cleaning services performed to restore proper flow and remove obstructions from the drainage system. Work includes:

• Inspection and assessment of the affected drain line(s) to determine the location and nature of the blockage.
   
• Mechanical snaking or augering of the drain line to clear clogs caused by buildup, debris, grease, or foreign objects.
   
• Hydro jetting (if applicable) used to thoroughly clean pipe walls and remove heavy buildup or tree root intrusion.
   
• Testing of drainage flow post-cleaning to confirm successful removal of blockage and system functionality.
   
• Recommendations provided for preventing future clogs and identifying any signs of damaged or deteriorated piping.
   

Service completed in accordance with industry standards, ensuring safe and effective drain operation.